MIKROTIK RB SXTG 2HnD RBSXTG2HND (RouterOS Level 4)Qucik View
MIKROTIK RB/2011iUAS-RM (RouterOS Level 5)Qucik View
The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.
The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.
RouterBOARD 2011UiAS-IN, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)
Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
There is PoE output function for port #10 – it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
RouterBOARD 2011UiAS-IN comes with desktop enclosure, LCD panel and power supply.
Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.
Product code: RB2011UiAS-IN
10/100 Ethernet ports: 5
10/100/1000 Ethernet ports: 5
CPU core count: 1
CPU nominal frequency: 600 MHz
Dimensions: 214mm x 86mm for PCB
Number of USB ports: 1
Operating System: RouterOS (License level 5)
PCB temperature monitor: Yes
PoE in: Yes
PoE out: Yes
Power Jack: 1
SFP DDMI: Yes
SFP ports: 1
Serial port: RJ45
Size of RAM: 128 MB
Storage size: 128 MB
Storage type: NAND
Tested ambient temperature: -35C to +65C
USB slot type: microUSB type AB
Voltage Monitor: YesQucik View
The BaseBox2 in an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
Product code RB912UAG-2HPnD-OUT
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 1
MiniPCI slots 0
MiniPCI-e slots 1
Wireless chip model AR9342-BL1A
Wireless standards 802.11b/g/n
Number of USB ports 1
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor Yes
Current Monitor No
SFP ports 0
USB slot type USB type AQucik View
MIKROTIK RB/912UAG-2HPnD-OUT-BaseBox2 (RouterOS 4)Qucik View
MIKROTIK RB951G-2HnD (RouterOS Level 4)Qucik View
MIKROTIK RB/951Ui-2HnD (RouterOS Level 4)Qucik View
MIKROTIK RB2011UiAS-2HnD-IN(RouterOS Level 5)Qucik View
MIKROTIK RB3011UiAS-RM (RouterOS Level 5)Qucik View
MIKROTIK RB750Gr3 hEX (RouterOS Level 4)Qucik View
MIKROTIK RB911G-5HPacD-QRT (RouterOS Level 4)Qucik View
MIKROTIK RB911G-5HPnD-QRT (RouterOS Level 4)Qucik View